Parkside PDKS 6.3 B3 Traducción Del Manual De Instrucciones Original página 64

■ When using the machine, the operator's hands may be exposed
to hazards such as cuts, abrasions and heat . Wear suitable
gloves to protect your hands .
■ The operator and maintenance personnel must be physically
capable of handling the size, mass and power of the machine .
■ Hold the machine correctly: Be ready to counteract any normal
or sudden movements – keep both hands ready .
■ Ensure that your body is balanced and that you have a secure
standing position .
■ Avoid cutting and cutting injuries: Avoid contact with the saw
blade or saw blade when the air supply is connected to the
machine . Wear protective equipment such as gloves, apron and
helmet .
■ Injuries can be caused by uncontrolled movements of the machine:
Always ensure that the guide plate (if fitted) is held firmly against
the workpiece .
■ Cutting with these machines leads to sharp corners .
Wear gloves to protect your hands .
■ Release the start/stop control in the event of an interruption to the
power supply .
■ Use only the lubricants recommended by the manufacturer .
■ Protective equipment such as safety glasses must be used; suitable
gloves and protective clothing are recommended .
■ Be aware that the built­in rotating tool will start after the command
device for starting and stopping has been released .
PDKS 6.3 B3 GB │ MT │ 61 ■