Sanus VLF728-B2 Manual De Instrucciones página 26

EXTEND / RETRACT -- ONLY IF NECESSARY
Avoid potential personal injury or property damage!
CAUTION:
DO NOT remove screws
TIP:
slight adjustment.
ONLY if needed, adjust the extension/retraction arm tension with
screw using hex key
E
26
13
E
E
, only turn enough for
.
13
TV LATERAL SHIFT
HEAVY
assistance with this step.
CAUTION
: Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete
applications.
Arm MUST remain centered in wall plate
11
concrete applications!
For wood stud applications ONLY:
1. Remove the TV (See PAGE 28).
2. Open cover strips .
P
3. Loosen but do not remove, locking screws
4. Slide arm to the desired position.
11
5. Tighten locking screws
S
CAUTION:
Avoid potential personal injury or
property damage! Always make sure both
are tightened so the TV is securely fastened to wall plate
6. Close the cover strips
P
! You may need
for all
08
.
S
.
locking screws
08
,then hang your TV (see STEP 3).
S
.