Tools And Materials; Before You Begin - Kohler K-403 Guia De Instalacion

Tools and Materials

Adjustable
Wrench
Tube Cutter
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Observe all local plumbing and building codes.
Shut off the main water supply.
Inspect the waste and supply tubing; replace if necessary.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1. Plumbing and Framing Installation
Determine the desired location for the valve according to the
rough-in information, and construct suitable stud and support
framing.
Use 3/4" nominal copper tubing and fittings throughout this
installation. Smaller diameter piping upstream or downstream of
the valve will reduce performance of the valve.
116641-2-BB
Solder
Thread
Sealant
2
Propane
Torch
Kohler Co.