Tools And Materials; Before You Begin - Kohler K-13680 Manual Del Usuario

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Assorted
Adjustable
Screwdrivers
Wrench

Before You Begin

Observe all local plumbing and building codes.
Refer to local codes and manufacturer's instructions for flush
valve requirements.
Shut off the main water supply.
Requires externally mounted power supply K-13667 or gang
supply K-13684.
Hardware is supplied for an in-wall plumbing connection.
Additional hardware is required for exposed plumbing
connection.
Requires 2" by 4" (5.1 cm by 10.2 cm) nominal framing to secure
the wall mount box. Connection to box may be made at any side
of box, but should not interfere with supply or outlet. Optional
top location of 2" by 4" (5.1 cm by 10.2 cm) cross framing is
shown.
For the best performance of the electronic sensor, rough-in to 6"
(15.2 cm) from the bottom of the wall-mount box to the top of the
urinal.
The wall-mount box may be mounted for left-side
supply/lower-right outlet (as shown) or right-side
supply/lower-left outlet.
For proper installation, the wall-mount box should be slightly
recessed behind the finished wall.
111769-2-AB
Hacksaw or
Sealant
Tape
Tube Cutter
2 Kohler Co.