Record Data - Stanley Compulevel Guia Del Usuario

47855 CompuLevel
Carry
STEP 1
STEP 2 Click
STEP 3 Click
*Clear CARRY or set
ELEVATION (see ELEV)
here.
Starting benchmark

Record Data

COMPULEVEL TM
contour or 3D maps, working alone or with a PC.
RECORD DATA
To record data with COMPULEVEL
1) Press and hold the REC and MARK keys together for two seconds.
The word 'REC' will start flashing in the display window.
2) Momentarily press the HOLD key to store each measurement.
3) Press the MARK key for two seconds to start a new sequence.
4) To exit the RECORD function, press and hold the REC and MARK keys
together for two seconds.
Notes: With each measurement, the display shows that measurement's
position within the sequence (PXXX) and the sequence number (fraction
digits).
The display will flash 'full' with each measurement when memory is within
20 measurements of being filled.
The number of remaining measurements will show in the fraction digits.
17 • Compulevel TM Measurement system
6/11/07 11:14
Can measure the height of a mountain or locate an elevation
across town – no pencil, paper or calculator needed.
Before base unit is moved to set-up 2, be sure to
HOLD
'HOLD' measurement module securely in position
(Press 2 seconds to enter CARRY) Once base unit
ZERO
is secured at set-up 2
MM
BU
Set up 1
can be used to record measurement data for creating
TM
Page 17
MM
BU
Set up 2
*Press 2 seconds MARK
ZERO
:
BU
Set up 3
To Clear