Setting The Time And Date; Alarm - auna Verticalo SE DAB Manual Del Usuario

SETTING THE TIME AND DATE

1. In DAB playing mode, press the MENU/INFO button to choose SYSTEM
by rotating the TUNE knob, "Main menu" will be shown on the screen.
2. Press the ENTER/SNOOZE button, "Time setup"will be shown on the
screen.
3. Press the ENTER/SNOOZE button again, "Set clock" will be shown on
the screen.
4. Press the ENTER/SNOOZE button again, "Set clock 00:00"(hour:minute)
will be shown on the screen. Rotate the TUNE knob and press the
ENTER/SNOOZE button to set and confirm the time.
5. Rotate the TUNING knob again, "Set date" will be shown on the screen,
press ENTER/SNOOZE button to enter setting date mode, "01-01-2016"
will be shown on the screen. Rotate the TUNING knob and press the
ENTER/SNOOZE button to set and confirm the date.
6. Rotating the TUNE knob again, "Auto update" will be shown on the
screen, press the ENTER/SNOOZE button to enter the setting mode.
"From radio" or "No update" will be shown on the screen by rotating the
TUNE knob. You may choose the desired update mode by pressing the
ENTER/SNOOZE button to confirm.
7. Rotate the TUNE knob once again, Set 12/24 hour " will be shown on
the screen, press the ENTER/SNOOZE button to enter the setting mode.
"Set 12 hour" or " Set 24 hour" will be shown on the screen by rotating
the TUNE knob. You may choose the desired mode by pressing the
ENTER/SNOOZE button to confirm.

ALARM

• Press the ALARM button to enter the alarm detail menu, rotate the
TUNE knob for below details, and press the ENTER/SNOOZE button to
set the Alarm detail:
A. Alarm1 / Alarm2: Rotate the TUNE knob to select, press the ENTER/
SNOOZE button to confirm.
B. Alarm activation: To set the alarm clock on, press the ALARM button,
"Alarm1 :off" or "Alarm2 :off" will be shown on the screen. Press the
ENTER/SNOOZE button, "Alarm detail off " will be shown on the
screen, press the ENTER/SNOOZE button again, "Alarm detail on" will
be shown on the screen, rotate the TUNE knob to set alarm time.
C. Set alarm time: Press the ENTER/SNOOZE button, "Time: 00:00"
(hour:minute) will be shown on the screen. Rotate the TUNE knob and
press the ENTER/SNOOZE button to set and confirm the time.
EN
23