Emerson Harlow Manual Del Usuario página 12

4. Installation on Emerson Fans Having
Two-Piece Die-Cast Switch Housing (continued)
4.6
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 17).
Position the Switch Housing Cover/Light Fixture
Assembly onto the Switch Housing and reinstall the
Two Screws (previously Removed in Step 4.2) and
tighten Screws securely (Figure 17).
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the cover
plate.
4.7
The LK150OM Light Fixture Assembly Light Sockets
are equipped to accept Three 6.5-Watt Medium Base
A15 LED Bulbs (supplied) (Figure 18).
The LK180 Light Fixture Assembly Light Sockets are
equipped to accept Four 6.5-Watt Medium Base A15
LED Bulbs (supplied) (Figure 18).
SWITCH
HOUSING
SWITCH
HOUSING
COVER
LIGHT FIXTURE
ASSEMBLY
REINSTALL
SCREWS (2)
Figure 17
LIGHT
SOCKETS
Figure 18
12
LED MEDIUM
BASE BULBS
LK150OM U.L. Model No.: PH334
LK180 ETL Model No.: LK180