5. When the measurement is completed, the cuff will
deflate entirely. Once the cuff is fully deflated, a 1
minute countdown will begin before starting the second
measurement automatically. This process will continue
until the end of the third measurement.
Note:
• If an ERROR code is displayed during measurement, the
monitor will repeat the measurement up to 3 times during
the consecutive measurement process.
• Remain still until all 3 measurements are completed.
6. At the conclusion of the third measurement, the Triple
Check average will be displayed.
To review your individual results that make the Triple Check
average, press the
IB-WGNBPA-750--03.indd 23
button.
press the
button
23
2012/7/24 上午 9:43