INSTALLING BATTERIES
1. Press down on latch and lift
the battery cover to open the
battery compartment.
2. I nstall or replace 4 "AA "
sized alkaline batteries in
the battery compartment
according to the indications
inside the compartment.
3. Close the battery cover by
pushing in the top end of the
battery door.
Replace the batteries if:
• T he weak battery symbol appears on the display.
• N othing appears on the display when the power is switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace all
batteries at one time (as simultaneous set). Use only 1.5V AA
alkaline batteries. Remove batteries when unit is not in use for
extended periods of time. Date and time will need to be reset if
batteries are removed or replaced. Clean contacts on battery and
in battery compartment with a soft dry cloth each time you install
batteries.
Note:
Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
IB-WGNBPA-750--03.indd 11
11
Battery
Cover
2012/7/24 上午 9:43