Samsung RQ48 Serie Manual Del Usuario página 32

Installation
STEP 6 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest setting, and wait for about an hour. Then, the
refrigerator will be slightly chilled, and the motor should be running smoothly.
4. Wait until the refrigerator cools down sufficiently and then use the refrigerator.
NOTE
It may take a longer time to cool down if you store food items in the refrigerator.
STEP 7 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from
walls and cabinets.
• The refrigerator is level and is sitting firmly on the floor.
• The door opens and closes freely, and the interior light turns on automatically when you
open the door.
32 English
Untitled-3 32 2020-11-12 4:05:58