Samsung RQ48 Serie Manual Del Usuario página 51

To check the MAC address
1. Press and hold Preserve (Middle compartment) and Lock simultaneously for 6 seconds.
- The entire LEDs on the main panel blink.
2. Press Preserve (Top compartment) to display the MAC address.
- The MAC address appears on the progress indicators (of the top and middle
compartment), and it will appear sequentially for 1 minute. For example, if the MAC
address is "11-22-33-44-55-66", the progress indicators displays the address for
1 minute in following sequence: "- -", "1 1", "2 2", "3 3", "4 4", "5 5", "6 6", "- -"
- After 1 minute, the main panel stops displaying the MAC address and returns to the
normal state.
NOTE
• The progress indicators displays "- -" if the MAC address is unknown or if a Wi-Fi
connection is not established or lost.
Peak Demand Off
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal from
the utility company, you can turn off the Peak Demand function.
When you turn off the Peak Demand function, the refrigerator ignores the SMART GRID
(Demand Response) signal and is not controlled by the utility company.
Turning off the Peak Demand function
• Unlock the main panel and press and hold Preserve of the middle compartment for
3 seconds to turn off the Peak Demand function.
- The Peak Demand Off indicator ( ) turns on.
- 'Or' is displayed on the progress indicator of the upper and the middle compartment.
• To turn on the Peak Demand function, press and hold Preserve of the middle
compartment for 3 seconds again.
- The Peak Demand Off indicator ( ) turns off.
Untitled-3 51
02 01 01
English 51
2020-11-12 4:06:02