Metra 99-2011 Instrucciones De Instalación página 5

Buick Rendezvous 2002-2007
1. Open center console and remove (2) screws
at front of console opening. (Figure A)
2. Remove liners from cup holders and storage
pocket next to cup holders, then remove
screws. Unsnap and remove panel. (Figure B)
(Figure A)
(Figure C)
DASH DISASSEMBLY
3. Remove (2) screws from bottom of radio/
climate control bezel, unclip and remove.
(Figure C)
4. Remove (3) 9/32" hex head screws to remove
radio. (Figure D)
Continue to Kit Preparation
(Figure B)
(Figure D)
Buick Riviera 1996-1999
1. Unsnap left side panel
unsnap (6) plastic rivets
exposing (1) Phillips and remove panel.
screw to remove.
(Figure A, 3)
(Figure A, 1)
4. Remove (5) hex head
2. Remove (1) Phillips screws now exposed under
screw and unsnap right overhang. (Figure A, 4)
side panel to expose (1)
5. Unsnap bottom edge of
Phillips screw beneath
trim bezel, then while
panel and remove.
holding overhang up,
(Figure A, 2)
unsnap and remove trim
3. Unsnap underside of
bezel by removing any
overhanging dash to
necessary harnesses.
(4)
(1)
(Figure A)
6. Remove (3) Phillips
screw to remove climate
control.
7. Remove (2) Phillips
screws to remove rear
support and (3) 9/32"
hex head screws to
remove radio.
Continue to
Kit Preparation
(2)
(3)
5
REV. 1/6/2020 INST-99-2011