Metra 99-2011 Instrucciones De Instalación página 8

Cadillac Fleetwood, Fleetwood Brougham 1990-1995
Radio bracket disassembly
1. Remove (4) 10mm nuts, (2) on top of the radio and (2) on
the bottom of the radio, that hold the factory mounting
brackets on. Save brackets and nuts for kit assembly.
Continue to Kit Preparation
Top factory bracket
Remove 10mm nuts
Remove 10mm nuts
Bottom factory bracket
(Figure A)
8
DASH DISASSEMBLY
Cadillac Eldorado,
Seville 1992-1995
1
1. Using a panel
removal tool, pry
out on the radio trim
ring and remove.
Use extreme care
when removing.
(Figure A)
2. Gently pry up on the
ashtray/gear shifter
trim bezel and
remove. (Figure A)
Caution: Some
models are equipped with bezels
made of real wood.
3. Remove (2) nuts securing the
bottom of the factory radio and
disconnect the wiring.
Continue to Kit Preparation
Chevrolet Blazer 2002-2005 (with double DIN),
S-10 2002-2004 (with ISO DDIN) /
GMC Sonoma 2002-2004 (with ISO DDIN) /
Oldsmobile Bravada 1998-2001
1. Remove (2) 9/32" hex-head screws from the knee bolster
panel.
2. Pull down on the panel and remove the 9/32" hex-head
screw(s) exposed on the bottom of the dash trim bezel.
(Figure A)
3. Remove (1) Phillips screw above the instrument cluster.
(Figure A)
4. Unclip the dash trim
bezel and remove.
(Figure A)
5. Remove (2) 9/32" hex-
head screws securing
the factory radio
and disconnect
the wiring.
Continue to
(Figure A)
Kit Preparation
1.800.221.0932
|
MetraOnline.com