Clearing Values From Memory - Walgreens WGNBPA-750 Manual De Instrucciones

To use the memory function:
Pulse
/min.
1. Press the USER-SELECT button to select User 1 or User 2.
START
USER
MEM
1/2 STOP
2. Press the MEM button to access memory. Pulse
/min.
START
USER
MEM
1/2 STOP
3. The monitor will first display the calculated average applied
to the last 3 memories.
Note:
• If the last 3 readings was a Triple Check average, then the Triple
Check average will be displayed.
• Memory averaging function will only average individual readings.
5. Every new press of the MEM button will recall a previous reading.
The latest reading will be recalled first.
Note:
While reviewing the readings, the Triple Check Average icon may
appear on the screen. Press the
readings that make up the Triple Check average.
SYS.
mmHg
DIA.
mmHg
SYS.
mmHg
or
DIA.
mmHg
button to review individual
press the
button
27

CLEARING VALUES FROM MEMORY

1. Press the USER-SELECT button to
select User 1 or User 2.
2. Press and hold the DATE/TIME and
buttons ( ) at the same time while
in memory recall mode, and the data
for the selected user will be erased
automatically.
Pulse
/min.
Triple Check Rest Assure
START and
USER
ON OFF AM/PM ON
MEM
STOP
1/2
Date Link
SYS.
mmHg
DIA.
mmHg
TALKING
LANGUAGE
MODE
OFF
28
Pulse
/min.
START
USER
MEM
STOP
1/2
TALKING
MODE