DISPLAY EXPLANATIONS
Date/Time
Indicator
Heart Rate
Systolic
Pressure
Diastolic
Pressure
9
3
Display Symbols:
3
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be replaced.
Pulse Symbol: Shows the heart rate per minute.
Risk Category Index: See page 24 for more information.
Irregular Heartbeat Detector: See page 25 for more information.
START
STOP
Rest Assure Symbol: Indicates when it is a moment to rest.
START
Memory Average: Displays average of last 3 readings.
STOP
AM/PM Averaging: Indicates the reading being displayed is an average from
the last 3 morning or last 3 evening measurements.
Multi-Read Symbol: Appears when Triple Check Measurement System is
turned ON.
Average Symbol: Displayed when viewing a Triple Check average.
Measurement Indicator: Indicates which measurement is being taken, or
which measurement is being viewed from a Triple Check average reading.
If any of the following letters and numbers appear in the area that systolic
pressure should be displayed, an error has occurred with your reading. See
Troubleshooting section of this manual for more information.
Measurement Error: Wrap the cuff correctly and keep arm steady during
measurement. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure
again.
Error Determining Measurement Data: Measure again.
System Error: Measure again.
10