Date & Time Set Procedure; Using Rest Assure; Using Triple Check Measurement System - Walgreens WGNBPA-750 Manual De Instrucciones

DATE & TIME SET PROCEDURE
1. To adjust the date and time, press
the DATE/TIME SET button
2. The display will show a blinking number showing the
YEAR. Change the YEAR by pressing the
Each press will increase the number by one in a
cycling manner. Pressing the
the number by one in a cycling manner. Press the
DATE/TIME SET button
entry, and the screen will show a blinking number
representing the MONTH.
3. Change the MONTH, DAY, HOUR and MINUTE as
described in Step 2 above, using the
to change the numbers and the DATE/TIME SET
button to confirm the entries.
(Please note that year does not appear on the display.)
repeat process to set MONTH, DAY,
HOUR and MINUTE
Triple Check Rest Assure
ON OFF AM/PM ON
.
button.
Date Link
button will decrease
again to confirm the
button/ button
TALKING
LANGUAGE
MODE
Press the button
blinking YEAR
TALKING
LANGUAGE
MODE
increasing YEAR
confirm the entry
TALKING
LANGUAGE
MODE
TALKING
MODE
13

USING REST ASSURE

This blood pressure monitor features the Rest Assure
function. It is suggested you sit quietly for 15 minutes
OFF
prior to measurement. The Rest Assure function will count
down the last 5 minutes before automatically starting the
measurement. To turn this feature OFF, slide the switch
on the back to the OFF position.
Triple Check
ON
TALKING
LANGUAGE
MODE

USING TRIPLE CHECK MEASUREMENT SYSTEM

TALKING
MODE
Date Link
The Triple Check Measurement System automatically
takes and averages three readings in a row, with 1
minute rest intervals in between each measurement. To
deactivate this feature and take only a single reading,
slide the switch on the back to the OFF position.
Triple Check
TALKING
MODE
ON
Date Link
TALKING
LANGUAGE
MODE
TALKING TALKING
MODE MODE
Rest Assure
OFF AM/PM ON OFF
Rest Assure
OFF AM/PM ON OFF
14