Kohler K-6816 Manual Del Usuario página 12

Wall Bracket
Escutcheon
Spline Adapter
Sleeve
O-Ring
Screw
Washer
Tissue Holder Assembly
8. Install the Horizontal Tissue Holder
Place the escutcheon onto the wall bracket, then place the O-ring
onto the escutcheon.
Slide the spline adapter into the escutcheon. Secure with the
screw provided.
Place the sleeve over the spline adapter.
Place the washer over the sleeve.
Position the tissue holder assembly onto the assembled
escutcheon.
Hold the tissue holder assembly in place while turning the
escutcheon clockwise until hand tight. Do not overtighten.
Adjust the tissue holder assembly in the desired position.
1020822-2-B 12 Kohler Co.