Sanus VLT5 Manual Del Usuario página 13

STEP 2B Solid Concrete or Concrete Block Option
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate
11
●
Minimum solid concrete thickness: 203 mm (8 in.)
●
Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
●
Minimum horizontal space between fasteners: 610 mm (24 in.)
1. Position the wall plate template
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2. Drill four pilot holes using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 101 mm (4 in.). Never drill into the mortar between blocks.
1
directly onto the concrete surface
on the wall at your desired height. Level the wall plate template and mark the hole locations.
11
10
Min.
610 mm
(24 in.)
2
10
101 mm
(4 in.)
10 mm
(3/8 in.)
13