S&P TD EVO ECOWATT Serie Manual De Instrucciones página 16

PUTTING OUT OF SERVICE
AND RECYCLING
Disposal must be carried out by competent
EN
personnel and in accordance with applicable
International, National and Local regulations.
Isolate fan equipment and any associated elec-
trical equipment and lock off. Remove electri-
cal connections.
Disconnect fan equipment from duct connec-
tions and cover connections with plastic sheet
to prevent exposure to any residue material in
fan equipment, and any contamination of ducts.
Dismantle and dispose in accordance with ap-
plicable National and International laws and
regulations, those parts whose service life has
expired.
EEC legislation and our considera-
tion of future generations mean that
we should always recycle materials
where possible; please do not forget
to deposit all packaging in the appro-
priate recycling bins. If your device is
also labeled with this symbol, please take it to
the nearest Waste Management Plant at the
end of its servicable life.
The fan unit is mainly made of steel, copper,
ferrite, aluminium and plastic. These compo-
nents should be recycling in the following cat-
egories:
• Steel and iron
• Aluminium
• Non-ferrous metals
• Plastics
• Insulating materials
• Cables
• Electronic scrap
To clarify any questions regarding S&P prod-
ucts contact your local distributor. For its lo-
cation and to obtain the EU Declaration of
Conformity and certifi ed technical data see our
web site www.solerpalau.com
16