Emerson SWEEP ECO Wi-Fi CF279BS00 El Manual Del Propietario página 15

5. How to Wire Your Ceiling Fan
5.8
Securely connect the Fan Red Wire to the Receiver
Red (TO MOTOR) Wire using a 18 ga. Wire Connector
(supplied with receiver) (Figure 24).
5.9
Securely connect the Fan Yellow Wire to the Receiver
Yellow (TO MOTOR) Wire using a 18 ga. Wire
Connector (supplied with receiver) (Figure 25).
5.10
After Connections have been made, turn Wires and
Connectors upward and carefully push them into the
Outlet Box (Figure 26).
Position the Antenna Wire on top of the Receiver. Slide
the Receiver completely onto the Hanger Ball, nestled
in the Hanger Bracket (Figure 26).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
FAN RED WIRE
RECEIVER RED WIRE
Figure 24
FAN YELLOW
WIRE
RECEIVER
Figure 25
YELLOW WIRE
OUTLET BOX
ANTENNA
WIRE
RECEIVER
Figure 26
15
(Continued)
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF315