Emptying The Dust Collecting Drawer En - Abicor Binzel xFUME ADVANCED Instructivo De Servicio

9 Maintenance and cleaning
9.5 Emptying the dust collecting drawer
1
4
1 Extraction system
Fig. 9 Emptying the dust collecting drawer
1 Use the device On/Off switch (4) to switch off the welding fume extraction system. (Fig. 5).
2 Pull out the mains plug.
3 Loosen the screws (3) and pull out the dust collecting drawer (2).
4 Empty the dust collecting drawer (2).
5 Dispose of the dust collecting bag in accordance with local regulations (no Fig.).
 12 Disposal on page EN- 19
6 Reverse the steps above to reassemble the system.
EN - 16
2 Dust collecting drawer
xFUME ADVANCED
2
3 2 screws
BAL.0731.0 • 2020-07-14