BH FITNESS YV 16 Manual Del Usuario página 6

F: Quick access push-buttons or keys
for frequency settings (5-10-15-20).
START-UP.-
1 Plug the mains cable (39) into the
socket (M) on the column, Fig. 2.
The other end of the cable is plugged
into the electric wall socket (220V).
Set switch (L) to position (I).
2. Press the ON/OFF key, select the
desired time, frequency. Press the
START/STOP key and the platform
will start after a few seconds.
3. You can stop the platform at any
time by pressing the START/STOP
key.
The Active Power vibration platform is
fitted with a safety fuse to protect the
equipment.
It will trip if it detects electrical
problems with the mains sup.
MANUAL FUNCTION.-
Press the SELECT key to select the
manual position,
START/STOP
platform.
While the platform is operating, you
can vary the exercise time (1-3-5-10
minutes) and the frequency settings
(5-10-15-20).
PROGRAM FUNCTION.-
This platform has 8 preset programs
that can help you to exercise without
making any changes on the monitor.
then press
key to start
Press the SELECT key to select the
Program position, then press the
keys to select the program, next press
the START/STOP key to start the
platform.
The profile graphs for these preset
programs can be found at the end of
this instruction book.
The VibroPower vibration platform is
fitted with a safety fuse to protect the
equipment.
It will trip if it detects electrical
problems with the mains supply.
If the
incorrectly with the red switch at the
back of the column the error message
E00 may appear. Switch the platform
off and then back on again after a few
seconds.
Follow the instructions given in the
Exercise Manual to exercise correctly
with the platform.
Do not hesitate to get in touch with us
the
if you have any queries, by calling:
the
THE MANUFACTURER KEEPS THE
RIGHT TO MODIFY THE PRODUCT
SPECIFICATIONS
PREVIOUS ADVISE.
6
platform is switched
+34 902 170 258
WITH
+ -
off
NO