Care Instructions - Hella 2VP 340 960 Serie Instrucciones De Montaje

EN
ENGLISH
In connection with these low
powers, which are very diff erent
from bulb versions, there can be
problems with the bulb failure
check during operation on various
traction vehicles. Since indicator
failure checks are required by leg-
islation, we recommend only oper-
ating the light in combination with
an indicator control unit part no.
"5DS 009 602-..., 5DS 009 552-
... or LED fl asher unit 4.. 009 492".
30

CARE INSTRUCTIONS

Outer lens
• Rinse under running water.
• Use a little detergent if neces-
sary (not a scouring agent!).
• Clean with a soft cloth or
sponge and then dry.
• Do not use a microfi bre cloth or
scouring pad!
In addition, further lighting functions
are detected by some traction vehi-
cles. This is a vehicle comfort func-
tion which is not required by legis-
lation and does not release drivers
from their obligation to see for
themselves that the lighting equip-
ment is working. Here, too, faulty di-
agnoses can be a result of the lower
power levels involved (instrument
panel in the driver cab indicates a
bulb failure although the function is
working).
The functional ability of these light
Refl ector
• Do not touch the silver-coloured
area with your fi ngers (hold the
refl ector at the side)!
• Do not do any cleaning inside
the bulb sockets!
Hella recommendation:
Use a natural sponge!
failure checks can only be estab-
lished by the vehicle manufacturer. If
the control unit in the vehicle can re-
strict the current to match the above
requirement, additional fuse protec-
tion is not required for the lamp. Op-
eration of the light with alternating
current or pulsed direct current is
not permitted! The functional ability
of these light failure checks can only
be established by the vehicle manu-
facturer. The individual light func-
tions may only be operated with a
vehicle fuse of max. 3A.