Using Your Refrigerator; Thermostat Setting Button - Beko BU 1150 HCA Manual Del Usuario

5

Using your refrigerator

Thermostat setting button

The operating
regulated by the temperature control.
Warm
1 2
(Or) Min.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is immediately
above the vegetable compartment.
The interior
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
temperature
Cold
3 4 5
Max.
temperature also
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
The interior temperature of your
refrigerator changes for the following
reasons;
leaving the door open for long
periods,
is
without cooling down to the room
temperature,
the room (e.g. exposing to sunlight).
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
is higher than 32°C, turn the
thermostat button to maximum
position.
than 25°C, turn the thermostat
button to minimum position.
15
EN