Mounting The Ex De Surface-Mount Beacon; Figure 4 Front View Of Ex De Surface Mount - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Mounting the Ex de Surface-Mount Beacon

Mount the beacon to a flat surface using the six 8.5 mm mounting holes. Use
installer-supplied fasteners suitable for the surface to which the device will be
mounted.
105.9 mm
(4.17 in)
3X M20
GLAND
ENTRIES

Figure 4 Front view of Ex de surface mount

122.6 mm
Model G-LED Global Series LED Beacon
Installation and Maintenance Instructions
(4.83 in)
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
23.2 mm
(0.91 in)
2X Ø8.5 mm
103.2 mm
(4.06 in)
11