Komet E-Drive Manual Del Operador página 100

7 Conditioning
46
Steam sterilizers that meet the requirements of EN 13060, class B or S,
and are also suitable for the sterilization of straight/contra-angle
handpieces are approved.
NOTICE! Do not exceed 140 °C (284 °F), even during the drying phase.
After sterilizing
1. Remove the instrument from the steam sterilizer immediately.
CAUTION! The instrument is hot. Risk of burns!
NOTICE! Do not attempt to accelerate the cooling process by
immersing the instrument in cold water. This can damage your
instrument.
2. Store all instruments so that they are protected from contamination.
3. Sterilize again once the storage period has elapsed.
Operating Instructions E-Drive
62 61 957 D3436.201.05.05.