Connecting The Instrument To An Endometer - Komet E-Drive Manual Del Operador

5 Operation
28
5.5

Connecting the instrument to an endometer

The E-drive makes it possible to connect a measuring cable for an
endometer by means of a clip in order to check the exact position of the
file in the root canal.
NOTICE! The endometers must comply with the requirements of IEC
Requirements of IEC 60601
60601.
1. Please observe the operating instructions pertaining to the
endometer being used.
2. Attach an Apex clip [ → 26].
3. Connect the measuring cable of the endometer to the clip's contact
pin.
4. Perform the measurement in accordance with the equipment
manufacturer's specifications.
Operating Instructions E-Drive
62 61 957 D3436.201.05.05.