Festo CDPX-F-CO Descripción Resumida página 2

PLC Interface
CDPX-F-CO
Brief
Description
Original: en
1303NH de/en
Description
The communication module is an interface designed to let the opera-
tor panel connect to the CAN network. The communication will be
through the dedicated DB9 male connector. The technical data is
listed in the table below:
Technical data
Communication protocol
Max speed
Optical insulation
WIRE connections
CAN Port
PIN Description
2 CAN -
3 CAN_GND
7 CAN +
Festo SE & Co. KG
Postfach
D-73726 Esslingen
Phone:
+49/711/347-0
www.festo.com
800 4845
CAN 2.0
1 Mbit
Yes
Dimensions
Mounting the Module
Electrostatically sensitive components may be damaged if
they are not handled correctly.
Remove the connector protective cover from the equipment before
installing the module