Hoover PET MAX COMPLETE Manual De Instrucciones página 13

Maintenance
Cleaning & Maintaining the Brush Roll
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
LUBRICATION: The motor and brush roll
are equipped with bearings which contain
sufficient lubrication for their lifetime.
The addition of lubrication could cause
damage. Do not add lubricant to motor or
brush roll.
Lower the handle to the reclined
position and flip the unit over.
To access the brush roll, unscrew
the nozzle guard from the nozzle.
1
Remove any hair or
blockages.
3
TIP: Rotate the brush roll manually to ensure the belt is properly installed.
Remove the brush roll by
pulling it up and out from the
vacuum belt.
2
With the belt in place, pull the
belt and slide the brush roll into
the nozzle making sure that the
brush roll end caps are in the
correct orientation. Place the
bottom plate aligning the screw
holes and re-install the 6 screws.
4
13