slowly. If after 60 seconds the pairing process
fails, please repeat steps 1 through 6
described above.
9. The earphones re-pair with previously
connected devices automatically when they
are powered on.
Note: If the earphones can't pair with your BT
device, delete the pairing history by pressing and
holding the Vol.
and
same time until the LED light flashes twice. Then
restart the earphones by turning them off, and
turning them back ON after 10 seconds. Verify
BT connection is established again between the
earphones and your mobile device.
Using the wireless earphones in hands-free
mode
1. Answering and ending a call using your
mobile phone
• When there is an incoming call, press the
button once to pick it up. You
Power/MFB
may also press the answer button on your cellular
phone to take the call.
• To end a call, simply press the Power/MFB
button once again. Likewise, you may also finish the
call directly using the end key on your cell phone.
Vol. buttons at the
• To reject or ignore an incoming call, press and hold
the Power/MFB
button for about 2 seconds.
• If you want to redial the last number called, press
the Power/MFB
button twice.
• To enable the voice assistant function* press and hold
the Power/MFB
button for about 1 second.
* The voice assistant function activation depends on each particular device.
2. Music playback
• Briefly press the Power/MFB
or pause audio playback.
• Press and hold the
track in your playlist. Press and hold the
button to go to the Previous track in your
playlist.
• Briefly press the
or
decrease the audio level on the earphones.
• When listening to music using your mobile
phone, playback will pause to allow the call to
go through.
• As soon as you hang up, music playback will
resume automatically.
button to play
button to go to the Next
buttons to increase or