Hunter Spa Select 90050 Manual De Instrucciones página 8

A24
I
Push the cover into place.
Existing Construction Installation
D
Use the motor housing as a template to mark position. Cut out an opening for the housing.
B1
Existing Fan
D
Remove tape.
Remove the existing fan and check to make sure the
opening is large enough to accommodate the new motor
.
housing (7.25" x 7.75")
41717-01 05/31/2006
8
41717-EngS_05.31.06.indd 8 5/31/06 3:53:27 PM