Ryobi BD-336 Manual De Utilización página 10

GB
F D
SPECIFIC SAFETY RULES
Do not operate charger with a damaged cord
or plug. If damaged, have replaced immediately
by a qualified serviceman. Following this rule
willreduce the risk of electric shock, fire, or serious
personal injury.
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. Following
this rule will reduce the risk of electric shock, fire,
or serious personal injury.
Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire. Following this rule will reduce the risk
of electric shock, fire, or serious personal injury.
To reduce the risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning. Turning off controls will
not reduce this risk. Following this rule will reduce
the risk of electric shock, fire, or serious personal injury.
Disconnect charger from power supply when not
in use. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
DANGER:
RISK OF ELECTRIC SHOCK. DO NOT TOUCH
UNINSULATED PORTION OF OUTPUT-
CONNECTOR OR UNINSULATED BATTERY-
TERMINAL.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them
these instructions also. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
SERVICE
Now that you have purchased your tool, should
a need ever exist for repair parts or service, simply
contact your nearest Ryobi Authorized Service Center.
E I P NL S DK N FIN
English
7
GR H CZ RUS RO PL