Operation - Klarstein 10030683 Manual Del Usario

OPERATION

To start cooking
After the hob be connected to electricity and power
on. Press and hold the ON/OFF control button for
about 3 seconds till you hear a "beep" to turn
1
the hob on. Now the hob enter into Standby mode,
all heat setting indicators and Timer setting indicators
shows [-].
Place a suitable pan on the cooking zone that you
2 wish to use. Make sure the bottom of the pan and the
surface of the cooking zone are clean and dry.
Touching the heating zone control button to select
3 the cooking zone you want to use. The heat setting
indicator of the selected zone will flash.
Set heat setting by touching the [+] or [-] button. If
press and hold either of the two buttons, the value will
adjust down or up rapidly, from 0 to 9 in circle. The
4
default setting of power level is [5], and power level
can be adjusted from 0 to 9. The heating element will
turn off under power level 0, with indicator shows [-].
EN
27