WIKA TR36 Manual De Instrucciones página 14

5. Commissioning, operation
5.1 Installation
These resistance thermometers are designed for screw-fitting directly
into the process. The insertion length, along with the flow rate and
viscosity of the process media, may reduce the max. loading on the
EN
protection tube.
If the resistance thermometer is to be operated in an additional
protection tube, a spring-loaded compression fitting must be used.
The case must be grounded against electromagnetic fields and
electrostatic charge. It is not necessary to connect the case separately to
the equipotential bonding system, provided that it has a fixed and secure
contact to the metal vessel, its components or pipes, and that these are
connected to the equipotential bonding system.
When there is a non-metal contact with the vessel, or with its
structural components or piping, the instrument must be provided with
equipotential bonding.
14
WARNING!
Neither repairs nor structural modifications are permitted,
and any would void the guarantee.
WIKA operating instructions model TR36