WIKA TR36 Manual De Instrucciones página 6

2. Design and function
Ensure that mechanical loads on the connector are minimised,
especially in case of increased ambient temperatures or strong vibration
loads.
EN
The electrical connection is made via an angular connector
DIN 175301-803, form A.
2.3 Dimensions in mm
Process connection with parallel thread (or without process
■
connection)
Angular connector
DIN EN 175301-803
Ø27mm
[Ø1.062 inch]
Ød ≥ 3mm
≥ [0.118 inch]
At a process temperature of > 150 °C [302 °F], a neck tube length N of 70 mm is
necessary.
Legend:
A Insertion length
N Neck tube length (70 mm)
Ød Probe diameter
6
without process
connection
ca. 48 mm
[approx. 1.889 inch]
SW27
Hex27
Ød ≥ 6 mm
≥ [0.236 inch]
with compression
fitting
Ød ≥ 6 mm
≥ [0.236 inch]
WIKA operating instructions model TR36
with neck tube
Ø6/8 mm
[Ø0.236/0.314 inch]
Ød ≥ 3mm
≥ [0.118 inch]
14352572.03
14352572.03