Sony ICD-SX68 Guia De Inicio Rapido página 10

2
Select a folder.
�
Press /MENU to display the folder
selection window.
�
Press 
folder in which you want to record
messages and then press
3
Press and hold
The IC recorder enters the record
standby mode. When you speak into
the microphone, the level meter in the
display window moves.
4
Adjust the recording level.
Adjust the maximum level of the
sound source to about –12 dB on the
recording level meter.
If "OVER" is displayed, press
 and adjust the recording level
down so that "OVER" is not displayed,
to prevent sound distortion.
10
GB
or  to select the

(record).


OVER indicator
Level meter
Press and hold
the sound level continuously. The
sound level is also displayed as a
number below the level meter.
5
Make other settings for recording
.
such as "LCF (LOW CUT)," "LIMITER,"
etc., in the menu.
6
Start recording.
�
Press
The operation indicator lights in red
and "REC" is displayed.
You do not need to press and hold
while recording.
�
Speak into the built-in microphone.
7
Press
or
 
or
 (record).
(stop) to stop recording.

to change
