Yakima FAIRING Manual De Instrucciones página 3

Peel away
backing from
clear pads.
on some vehicles
with tracks or rails,
it is possible that
fairing may not make
contact with painted
surfaces.
insert bolts into
outer brackets.
Apply a small
amount of
waterproof
lubricant to the bolt
threads.
1032276D-3/8
snap the brackets of the
fairing onto the front crossbar
on your vehicle's rack.
Center the fairing on the rack.
Apply to vehicle's
surface where black
pads (on bracket feet)
make contact with
Tighten hex keys
onto the bolts while
applying pressure to the
brackets.
TighTEN AgAiN
PERiodiCAlly.
vehicle.
Pads may not be
necessary.
if you have purchased the
Yakima Accessory Lock,
install now using the Lock
instructions.