Kohler K-706075 Guía De Instalación Y Cuidado página 9

X X
6. Center the Door Frame
Open the door and remove the rubber seal from the inside of the door frame.
Confirm the strike side wall jamb holes are aligned with the anchors. Adjust if needed.
Install the #8 x 1-1/2" screws through the access holes in the door frame.
Fully tighten the screws.
Reinstall the rubber seal.
Center the door frame between the wall jambs. Dimension X should be the same on both sides.
Kohler Co. 9 1280800-2-B