Trimming; Cleaning - Philips Norelco Spectra 8 8895XL Manual Del Usuario

8894_95XLDFUwspanish.qxd 5/28/04
ENGLISH
20
C
Put the protective razor head cap on the
4
razor to protect razor heads.
Replace Spectra razor heads (model # HQ8)
once a year for optimal shaving results.

Trimming

To groom sideburns and moustache:
Turn razor ON.
1
C
2 Push up Trimmer Slide Switch.
The trimmer can be activated while the razor is
running.
C
Hold Trimmer as shown and move in
3
downward strokes with gentle pressure.
Close Trimmer by sliding Trimmer switch
4
down.
Turn razor OFF.
5

Cleaning

Always switch Razor OFF and remove from
charging stand before cleaning.
Never clean, remove or replace head
assembly while motor is on.
Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
10:21 AM Page 20
Do not use razor if combs are damaged or
broken. Facial injury may occur.
Every Week: Razor Heads
C
The easiest and most hygienic way to clean the
razor heads is to rinse them every week with
hot water: Water from the tap should be on a
hot setting, BUT BE CAREFUL TO TEST
WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
Regular cleaning guarantees better shaving
results.
You may also quickly rinse your razor heads
after each use.
Always turn razor OFF, unplug from outlet
1
and remove cord from razor or charging
stand before cleaning.
C
2 Press the Razor Head Release Button, flip
2
open the Razor Head Assembly.
C
Clean razor heads and hair chamber by
3
running under hot water.
Close the Razor Head Assembly and shake
4
off excess water.
C
Open Razor Head Assembly again and
5
leave open to air dry.
ENGLISH
21