Charging Stand Clock; Before First Use - Philips Norelco Spectra 8 8895XL Manual Del Usuario

8894_95XLDFUwspanish.qxd 5/28/04
ENGLISH
14
The block display in the charge meter
indicates how much power is left in the
battery.

Charging Stand Clock

To set time
C
1 Turn clock module, located on underside
of stand, counterclockwise to remove
from stand.
1
2
C
Press small, left button to set correct time.
2
C
Replace clock module into underside of
3
stand.Turn clockwise to secure in place.
2
1
To replace clock battery
C
Turn clock module counterclockwise and
1
remove from stand.
1
2
10:21 AM Page 14
C
Remove battery cover and then use a flat-
2
bladed screwdriver to lift out the battery.
C
3 Replace battery with 1.5V button cell
watch battery, placing rounded side of
battery into battery compartment, flat side
(+) facing out. Replace battery cover.
C
4 Replace clock module into stand and turn
clockwise to secure in place.
2
1

Before first use

Charge the razor before you start using it
(see 'Charging').
Remove any sticker or protective foil from
the LED Display.
Important
Only use the power plug and/or charging
stand provided to charge the razor.
The charging plug transforms 100 – 240V AC
to 12V DC.
ENGLISH
15