Delete Wireless Sensors By Sms; Delete All Rfid Tags By Sms; Delete All Remote Controls By Sms; Restore System To Default Setting - Smanos X500 Manual Del Usuario

Delete wireless sensors by SMS

All sensors can be removed from the system by texting "21" to the SIM card number in
the control panel.
Delete wireless sensors successfully.

Delete all RFID tags by SMS

All RFID tags can be removed by texting "22" to the SIM card number in the control
panel.
Delete RFID tags successfully.

Delete all remote controls by SMS

All remote controls
can be removed by texting "23" to the SIM card number in the
control panel.
Delete remote controls successfully.
33
X500-UM-EN-IT-ES-PT-V1.0.indd 40-41
21
22
23
In the App, you can remove the
sensors, RFID tags and remote
controls separately:

Restore system to default setting

Also called a "hard reset. " Text "0000" to the SIM card number in the control panel.
0000
A hard reset can also be performed by holding the
switch of the control panel from off to on. Until 2 beeps are heard, means the system
has been restored to default setting.
IMPORTANT: If the control panel is on, turn it off first to apply the function.

Synchronize control panel time

When the control panel is power off, the time will restore to 00:00. Please synchronize
the time by sending "99".
99
The control panel will send notification "Operate successfully" when the time is
restored. The system will send notification "Please reply '99' to sync panel time." when
the power is turned on from power failure.
EN
button, then slide the power
34
2016/12/9 9:27:54