Accessories; Remote Control; Overview; Arm - Smanos X500 Manual Del Usuario

Accessories

Accessories in this kit can work only with its own control panels.

Remote Control

RE2300 can be attached to your key ring, or just put into your pockets or purses.
When you are about to exit or entry the house, you can use it to arm or disarm the
system. In case of any emergency, just press the
activated immediately.

Overview

LED Indicator

Arm

Disarm

Stay
SOS
LED indication
LED flashes once: Armed or in home mode
LED flashes once: Disarmed
LEDs flashes once: SOS
37
X500-UM-EN-IT-ES-PT-V1.0.indd 44-45
[SOS] button, the alarm will be
Guide Point for the Blind
Metal Ring
Arm (Away arm)
In arm state, the system will trigger an alarm when detecting intrusion.
Press the [Arm ] button. The control panel beeps once and the mode LED is on,
indicating the system is in the arm state.
Note: If you do not want to take the remote control, entry and exit delay can be set. For related
definition and setting, please refer to page 26.
If a wireless keypad is used, you only need to enter the password on the keypad without using the
remote control.
Disarm
In disarm state, the detectors (except those sensors in the 24-hour zone) will not
trigger an alarm when detecting intrusion.
Press the [Disarm ] button. The control panel beeps twice and the mode LED is on,
indicating the system is in disarm state.
Note: If entry and exit delay is set, you can enter your home directly in the arm state, then disarm
the system within the delay time. No alarm will be triggered in this case. If you disarm the system
after the delay time, the system will trigger an alarm.
EN
38
2016/12/9 9:27:54