Installation Notices 49 - Smanos X500 Manual Del Usuario

Installation Notices
Pay attention to the following during installation:
1. Mount the detector to a location close to the entry or exit
It is recommended to mount it at the height of 2m from the ground. The detector aims
at preventing intrusion. Detecting human movement at the entry or exit is critical for
security.
2. Mount the detector in a proper angle
49
X500-UM-EN-IT-ES-PT-V1.0.indd 56-57
The installation angle affects sensitivity
directly. The sensitivity is optimal when
the walk direction is vertical to the
infrared direction. Choose the best
location and angle according to the
actual situation and detection scope
diagram.
3. Avoid facing to glass windows or doors
Strong light interferes with detection
sensitivity. In addition, complicated
situations, such as traffic flow, stream of
people, also should be avoided.
4. Avoid facing to or positioning close to heat/cold sources
Heat/cold sources, such as heat extraction
units, heaters, air conditioner, microwave
oven, refrigerator, which may cause false
triggering, should be avoided.
5. Avoid facing to swinging objects
Swinging objects may also trigger false
triggering. Besides, if there are two
detectors covering the same scope, adjust
the locations to prevent cross-interference.
EN
50
2016/12/9 9:27:56