Record And Play Back Voice Message; Naming Rfid Tags; Speed Dial; Phone Dial - Smanos X500 Manual Del Usuario

Record and play back voice message

Press the




button for 2 seconds to record a
personal message of up to 10 seconds. If your
message is shorter than 10 seconds, press the





button to stop recording. The voice message
can be played back by pressing the
seconds.

Naming RFID tags

Besides the ability to disarm the system, the RFID tags can be given a name. If
someone disarm the alarm system, a message with the name will be sent to the pre-
stored RFID text number.
Nancy
IMPORTANT: The administrator can only receive a notification if the RFID tag
has been assigned a SMS number for RFID tags is stored. (Settings can be found
at page 21 and 25.
11
X500-UM-EN-IT-ES-PT-V1.0.indd 18-19
for 2
Nancy came home
Mom
Administrator

Speed dial

When you press the button for 3 seconds, the system will dial the preset emergency
number immediately. The call ends when you press the
speed dial number can be found at page 22.

Phone dial

Enter a phone number and press the button. The system dials out and you can
make the call via the built-in microphone and speaker of the alarm system. When you
press again the call is ended.

Changing the language

English
Send a SMS message with "0001" to the telephone number of the SIM card in the
control panel. The language of the alarm system will be changed into English. The
control panel will send a SMS message to confirm the language is set successfully.
EN
button again. How to set the
12
2016/12/9 9:27:51