Kohler K-4896 Instrucciones De Instalación página 2

INSTALLATION
K-4896 bidet is shown throughout
the instructions.
S Install bidet faucet and drain
according to manufacturer's
installation instructions.
S Set bidet on floor in its
mounting location.
S Trace outline of bidet base,
and mark location of the two
side mounting holes.
S Remove bidet from the
mounting location.
S Drill two 3/16" (5mm) diameter
holes at the marked side
mounting hole locations.
S Thread floor bolts (included)
into the mounting holes.
A
1010408-2-
Side
Mounting
Trace Outline
Hole
On Floor
Mounting
Hole Marks
2
Kohler Co., Kohler, WI U.S.A.
Bidet
Outline