Cameo ROOT PAR Manual De Usuario página 19

Disp Back = Display backlight
Sig Fail = Operating status if
DMX signal is lost
Master/Slave?
Power Mode = Battery life and
LED brightness
setting
IR Remote = Activates or deac-
tivates control via
IR remote control
Sound = Adjusts the way
the music control
works
PWM = LED PWM
frequency
Calibration = Color calibration
Reset = Resets settings
Edit Preset = Saves all system
settings in 3 indi-
vidual presets
Service = Only for servicing purposes
SYSTEM INFORMATIONEN (System Info)
Starting from the main display, press MENU to go to the main menu. Using  and , now select
the System Info menu option and press EENTER to confirm your selection.
Off Deactivates after approx. 30 seconds of
inactivity
On Permanently on
Hold Last command is held
Black Activates blackout
User 1 User Color 1 is activated
STD Standard setting with maximum
brightness
ECO Extended battery life at approx. 50%
brightness
On Activates control via the IR remote
Off
Deactivates control via the IR remote
Last Color is kept until next pulse
Off Color disappears after a short while
until the next pulse
650 Hz, Selects the LED PWM frequency
1530 Hz,
2150 Hz,
4000 Hz
Red, Green, Individual color calibration. Cross-mode
Blue, White brightness setting of the 4 LED groups
RGBW with values from 0–255
Factory Resets to factory settings: Press ENTER
to reset, MENU to cancel
Preset A Resets to Preset A: Press ENTER to
reset, MENU to cancel
Preset B Resets to Preset B: Press ENTER to
reset, MENU to cancel
Preset C Resets to Preset C: Press ENTER to
reset, MENU to cancel
Preset A Press ENTER to save
Preset B Press ENTER to save
Preset C Press ENTER to save
19