Taurus AROA GLASS Manual Del Usuairo página 6

Ocultar thumbs Ver también para AROA GLASS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
Kettle
Aroa Glass
DESCRIPTION
A Lid
B Lid opening button
C Jar
D Base
E On/off switch
F Filter
G Supply cable
H Cord housing
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Respect the MAX and MIN levels
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Unplug the appliance from the mains before
refilling the water tank.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not put the appliance away if it is still hot.
- Only use water with the appliance.
- The appliance is only intended for heating wa-
ter; as a consequence the appliance should not
be used for the cooking or heating of milk...
- WARNING: Do not use the appliance if the
glass is cracked or broken.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time it is
advisable to boil water within, so as to remove
all remaining dust and impurities.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
FILLING WITH WATER:
- The deposit must be filled with water before
turning the appliance on.
- Extract the receptacle from its place.
- Open the lid by pressing the opening button.
- Fill the receptacle taking care to observe the
MAX and MIN level
- Close the lid.
- Replace the tank in its housing, ensuring that it
is well fitted.
USE:
- Attach the appliance to its base / connector
making sure that it is correctly fitted into place.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- The pilot light comes on.
- Once the water is boiling the pilot light will
switch off and the kettle will stop automatically.
- Remove the kettle from its base and pour the
water
- Do not open the lid when pouring the water.
ONCE YOU HAVE FINISHED USING THE APPLI-
ANCE:
- Unplug the appliance to the mains.
- Remove the water from the interior of the
appliance.
- Clean the appliance.
CORD HOUSING
- This appliance has a cable compartment situat-
ed on its underside
CARRY HANDLE/S:
- The device has a handle on the rear part so it
can be transported easily and comfortably.

Publicidad

Tabla de contenido
loading

Tabla de contenido