Change Settings; Remote Sensor - Oregon Scientific BAR926HG Manual Del Usuario

To install the main unit batteries:
NOTE Do not use rechargeable batteries.
shows when batteries are low.
NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
UNIT
LOCATION
Main Weather Forecast Area
Remote Temperature / Humidity Area
UV Sensor UVI / Barometric Pressure Area

CHANGE SETTINGS

1. Press SEL to switch between Areas.
indicates the selected Area.
2. Most Areas have alternate display options
(for example, Clock / Alarm or Barometer / UVI).
Press MODE to switch options, or
switch between clock and alarm.
3. Press and hold MODE for 2 seconds to enter setting
mode.
4. Press or
5. Press MODE to confirm.

REMOTE SENSOR

This product is shipped with the RTGR328N Thermo
/ Hygro Sensor. The main unit can collect data from
up to 6 sensors (5 Thermo / Hygro Sensors and 1 UV
Sensor).
The main unit is compatible with the following sensors:
THGR228N, THGR328N, THR228N, THR328N and
THWR288. (Additional sensors are sold separately.
Contact your local retailer for more information.)
10
to change settings.
/ to