Korg PA800 Manual Del Usario página 3

4.
A file browser will appear in the display:
At this point, you can release the INTRO 1 button.
5. From the Device Selector, choose the device where you
copied the Operating System. For example, if it was a USB
pen drive connected to the front USB port, choose USB-F:
Note: If you are not able to easily select the file, please press
the GLOBAL button to open the Touch Panel Calibration
page, and re-calibrate the display.
6. Browse through the folders and files, until you find the
"Pa800_os_v[nnn].pkg" file. When you find it, touch it and
press the Select button in the display:
Upgrading Pa800's Operating System and Musical Resources
7.
The file begins to be copied in the Operating System area
inside the instrument. A progress bar will show the copy
advancement:
Warning: Do not power the instrument off, or remove the
USB device, while this procedure is running!
Note: Loading the "Pa800_os_res_v[nnn].pkg" files may take
up to 10 minutes.
8. At the end of the procedure, press the OK button in the dis-
play to restart the instrument:
Loading a .BKP file
Loading a ".BKP" file is described in the User's Manual, in the
Media chapter.
© 2006 Korg Italy SpA
3
Loading a .BKP file