Publicidad
Idiomas disponibles
Idiomas disponibles
InSErt tongUE Into
vEHICLE'S HItCH.
IF SpARe TIRe cAuSeS
InTeRFeRence, Do noT
uSe ThIS pRoDucT!
Align the holes in the receiver
to the holes in the base.
ATTAch ARMS To MAST.
attach lock-washers and bolts.
Tighten bolts with 9/16" wrench.
1033623B-3/15
InStaLL LargE boLt,
LoCk-waSHEr, anD
waSHEr.
Install bolt, lock-washer, and
washer from right side of
receiver.
TIghTen with adjustable wrench.
Insert coupling nuts into back of mast.
attach one rubber strap to each
cradle and stabilizer.
pUSH tHE SafEtY
CLIp onto tHE
ExpoSED EnD of
tHE boLt.
stabilizer
To slide cradles along the
carrier arms, close cradle and
stabilizer. Close cradles while
loading bikes.
NOTE:
Publicidad
